Toro 51599 Ultra Variable Speed Electric Blower
October 11, 2010 by Tool Editor
Filed under Electric Tools
Powerful and effective, the Toro Ultra 3-in-1 Blower, Vacuum, and Leaf Shredder makes completing yard work fun and easy. With air speeds up to 235 mph, this electric blower nevertheless is lighter, quieter, and cleaner than similar gas blowers. And with a sleek, ergonomical design, it's a tool that is easy to use and will grab your neighbors' attention.
Match the Power to the Task for Better Results
Tackle big clean-up jobs the right way with this powerful blower vac. A variable speed 12 Amp motor lets you select from an infinite variety of speeds between 112 mph and 235 mph. This means that you can use low speeds to clear off hard surfaces and clean up tight areas without making a mess and without sacrificing the blower's high-speed functionality.
Air Speed and Air Volume to Get Yard Jobs Done
Unlike some manufacturers, who simply reduce the size of their blower nozzles to achieve higher air speed ratings without increasing the practical value of their tools, Toro gives this blower vac the ability to balance between air speed (measured in mph) and air volume (measured in cfm) to ensure maximum power and performance. This Ultra blower vac offers air speeds up to 235 mph and air volume up to 255 cfm, allowing you to move a substantial volume of leaves and debris with ease.
3-in-1 Versatility Makes Managing Tasks Easy
A convenient quick-release latch lets you convert your blower into a vacuum in seconds without any tools, while a metal impeller makes it easy to mulch debris.
The magnesium serrated metal blades on the impeller shred leaves and other unwanted debris into a fine mulch that you can use around your lawn and garden, saving money and recycling important nutrients. It also makes it easy to dispose of unwanted yard waste, since the impeller can reduce 16 bags’ worth of leaves to one bag.
Clean and Efficient with Electric Power
Compared with gas blowers, electric blowers are quieter, more eco-friendly, and require less maintenance. They start up instantly without requiring you to master a finicky pull cord. There's no messy gas-oil mixture to worry about, and you don't have to contend with noxious fumes to get a job done.
This high-powered blower also weighs in at a very manageable 7.5 pounds, making it easy on your back.
Hitachi CJ18DLP4 18-Volt Lithium-Ion Jigsaw
October 2, 2010 by Tool Editor
Filed under Cordless Tools
The tool body of the Bare-Tool Hitachi CJ18DLP4 18-Volt Lithium-Ion Jigsaw is compatible with all Hitachi Li Ion, NiCd and NiMH 18V batteries. The Hitachi CJ18DLP4 features a 4-mode orbital action for the most accurate and efficient cutting in various materials. The CJ18DLP4 is equipped with and LED light for improved visability and a tool-less blade changing system for quick and easy blade changes. With its lightweight design and ergonomic D-shaped elastomer grip, the Hitachi CJ18DLP4 provides comfort and control while preventing slippage.
Milwaukee 2401-22 12-Volt Li-Ion Compact Driver Kit
October 24, 2009 by Tool Editor
Filed under Cordless Tools
The Milwaukee M12 lithium-ion screwdriver is the next generation of cordless power. Armed with Quick Bit-Loading 1/4-inch hex chuck for bit insertion and one-handed release, this is a must-have in any tool arsenal. Part of the seamless M12 Lithium-Ion Cordless System, the M12 screwdriver has increased the number of useful features without cutting the power.
Examples of innovation include extremely light, one-handed release quick bit-loading and 5-year warranty.
The Milwaukee M12 lithium-ion screwdriver has unbelievable balance to reduce strain and tension. The most compact screwdriver in its class, the M12 screwdriver packs a punch without the bulge and slow recharge time of other leading brands.
Features, Benefits & Applications
The Milwaukee M12 lithium-ion screwdriver aggressively takes down downtime with time-saving features, including a battery fuel gage displaying remaining run-time, metal gear housing for jobsite durability, built-in LED for illumination and variable speed trigger for output power control.
The M12 lithium-ion screwdriver serves a wide variety of applications and has the power to drive common small fasteners all day on one charge. Weighing in just under 2 pounds, the new M12 lithium-ion screwdriver delivers an impressive 500 RPM and 100 in./lbs. of torque, making it the leading 12-volt lithium-ion screwdriver in its category.
Milwaukee Lithium-Ion Battery
Milwaukee is the leader in lithium-ion technology, launching the first Li-Ion System in 2005 and the first backward compatible Li-Ion in 2006. Perfecting the formula in 2008, Milwaukee's lithium-ion batteries are 65% lighter, 50% smaller and store more than 30% more power than "compact" NiCd batteries. They also feature a fuel gauge that lets you know when to recharge, making it faster and easier to scope projects and decrease downtime.
To combat on-site problems like bent/broken terminals, damaged clips and broken welds caused by use and abuse, Milwaukee lithium-ion batteries are equipped with recessed terminals, slide pack dual clips and over-molded housing, and integrated welded frame and cell separators.
Dremel 220-01 Rotary Tool Work Station
October 11, 2009 by Tool Editor
Filed under Cordless Tools
Ideal for crafts, hobbies, metal working, and a variety of around-the-house jobs, the 220-01 Dremel Work Station transforms any Dremel rotary tool into a tabletop drill press. It can be bolted on to your workbench, and it has the versatility to operate as a tool holder, flex shaft holder, and drill press. This rotary tool work station holds Dremel rotary tool models 100, 200, 275, 285, 300, 395, 595 and 850.
All-In-One Operation
The Dremel Work Station gives you the flexibility to tackle hobbies, fix-it renovations, or special projects without having to invest in a variety of separate tools and attachments. Its stable, sturdy design lets you perform low-torque, high-speed jobs like drilling holes in metal to make earrings and bracelets, or sanding even the most detailed pieces of an architectural model. Measuring 56 square inches, and offering a drill depth of two inches, the sturdy, slotted base has four clamping points, while a rack and pinion feed lever ensures smooth, accurate operation.
Flexibility for Intricate Work
Whether you're buffing stones or sanding parts of a radio-controlled airplane, you'll appreciate that you can tilt the Dremel Work Station in 15-degree increments from 15 to 90 degrees horizontal -- perfect for more focused, intricate work. When you're grinding or polishing materials, the tool holder prevents slippage by keeping tools at 90 degrees, and the telescoping FlexShaft tool stand lets you adjust to any height between 16 and 29 inches. Once you've finished working for the day, place bits, collets, and wrenches in the tool caddy for easy clean-up and storage.
Easy Setup and Durable, User-Friendly Design
Easy to set up and operate, the Work Station features straightforward, durable construction. Clips keep messy cords from obscuring your visibility as you work, and inch and metric markings on the base allow for precise measurements and ensure that your adjustments are consistent, too. Compatible rotary tools attach and detach smoothly so you can polish, grind, or drill holes in stone, metal, or glass for rivets, eyelets, or cold connections of any sort.
Hitachi DS10DFL 12-Volt Peak Li-Ion 2-Speed Drill
October 2, 2009 by Tool Editor
Filed under Cordless Tools
Compact and Lightweight Design Fits in Tight Spaces and Minimizes Fatigue
Weighing just 2.2 pounds and measuring less than eight inches in length, the DS10DFL is easy to hold, and it's able to get into tight spaces better than larger model drills. Its lightweight design also allows you to work longer and achieve more accurate results.
195 In./lbs. of Torque and Best-in-Class Clutch for Versatility
Designed to be as versatile as it is powerful, the DS10DFL provides 195 in./lbs. of torque for various drilling and driving applications, as well as a best-in-class 21+1 stage clutch with 21 torque settings and a drill mode for ultimate precision and control in both forward and reverse.
LED Light for Illumination; 3/8-Inch Keyless Chuck for Simple Bit Replacements
The DS10DFL is designed to be exceptionally user friendly. It's equipped with an LED light positioned under the chuck that easily illuminates dark spaces, and it features a free-standing design that allows the drill to stand on its own when not in use, making it extra-convenient to use. It also boasts a 3/8-inch keyless chuck for simple bit replacements, giving it the flexibility to take on a range of jobs.
Responsive Variable Speed Trigger for Optimum Control
To ensure consistency and precision, the DS10DFL includes a responsive variable speed trigger that immediately gives you complete control, even during more intricate operations or with one-handed operation. HitachiÆs patented battery charger features unique circuitry that prevents overheating or power loss, ultimately extending the life of the Lithium Ion battery and saving the user from costly replacements.
Warranty Information
This lithium ion driver drill is backed by Hitachi's 10-year Lithium Ion Tool warranty and two-year lithium ion battery warranty. For additional value and peace of mind, Hitachi's 12-volt Peak batteries are 100-percent compatible with all past Hitachi Micro Series tools.